Reader-supported: if you buy through links on this page, we may earn a commission at no extra cost to you. How this works

Due on Receipt vs Net 15 vs Net 30: Which Terms Get You Paid Fastest?

Net 30 is a loan you never agreed to make

The project ended on the 4th. The invoice went out that evening. And because three small words at the bottom of it said "Net 30," I knew before I closed my laptop that I would not see that money until the middle of next month — not because the client was difficult, but because I had agreed, without ever really deciding, to wait.

Most freelancers inherit Net 30 the way they inherit a default ringtone. It was just there, it sounded professional, and nobody asked whether it should be shorter. This article asks. Below: what the common terms actually mean, what each one does to a real $2,000 invoice, why big companies cling to Net 30 while a solo freelancer should not, how to move existing clients to shorter terms without a fight — and the one case where the shortest term of all, due on receipt, can backfire.

What the terms actually mean

Payment terms are a due date written in shorthand. The number is calendar days, counted from the date on the invoice — not from the day you finished the work, and not from the end of the month.

One detail in that list matters more than the rest: the clock starts when the invoice is sent. Every day you sit on finished work before sending the invoice is a day you quietly added to your own terms, for free.

One $2,000 invoice, four different paydays

Say you finish a $2,000 project and send the invoice on March 4. Here is when the money is due under each term — and when it is likely to land if your client pays about eight days late, which is roughly the US average in Xero's Small Business Insights data:

Terms Due date Money lands (avg.)
Due on receipt March 4 March 12
Net 7 March 11 March 19
Net 15 March 19 March 27
Net 30 April 3 April 11

Same work. Same client. Same invoice. The only difference is the term — and it moves your payday by a full month. If your rent leaves your account on April 1, the Net 30 version of this invoice arrives ten days too late to cover it. The due-on-receipt version arrives three weeks early.

Now run that over a year. If you bill about $2,000 a month on Net 30, there is permanently about one extra month of your earnings — roughly $2,000 — sitting in your clients' bank accounts instead of yours. You are running a small, free bank for the people who hire you.

Clients take the time you give them

You might hope that generous terms buy goodwill, and that goodwill buys faster payment. The data says the opposite: clients pay relative to the deadline you set, so a later deadline simply means later money.

FreshBooks analyzed more than a million invoices sent through its platform over the course of a year. Invoices with 7-day terms were paid within a week 58% of the time. Invoices with 30-day terms managed that only 40% of the time — and 28% of them took more than 30 days to be paid, against 17% for 7-day terms. Lateness itself is not unusual, either: Bonsai's analysis of invoicing data from more than 100,000 freelancers found that 29% of freelance invoices are paid at least a day late, and Xero puts the average wait for a US small business at about 30 days from invoice to payment.

Shortening your terms does not make clients punctual. It moves the whole timeline — due date, lateness and all — about three weeks earlier. Earlier is the win.

Why big companies default to Net 30 — and why you are not a bank

Net 30 was not designed for you. It comes from big companies buying from other big companies on trade credit, where an accounts payable department collects invoices and pays them in batches, once or twice a month. For a company with a finance team and a credit line, waiting 30 days is simply how the machine runs. It is also free financing: every extra day a large company holds onto its cash is a day that cash works for them instead of you.

None of that describes a solo freelancer. You have no accounts department, no credit line, and no batch run. You have rent, tax payments, and a banking app you check more often than you would like to admit while an invoice is outstanding. When you offer Net 30, you are lending your client money for a month at 0% interest. A bank would charge for that loan. You are not a bank, and you do not have to lend like one.

There is one honest exception: some large clients genuinely cannot pay faster, because their payment process is fixed by policy. The pushback script below covers how to handle that without giving the month away for free.

How to move existing clients to shorter terms, without a fight

The mistake is trying to change terms on an invoice that is already out. The easy moment is the start of the next project, when new terms just look like paperwork. Three scripts cover most situations:

For the next project with a current client:

"Quick admin note before we start: I've standardized my payment terms this year — invoices are Net 14 now, so they're due two weeks after they're sent. Everything else about how we work stays the same."

The annual reset, which moves your whole client list at once:

"A small update for the new year: I'm moving all clients to the same payment terms — Net 14 from January. It keeps my bookkeeping simple and means I'm not running a different deadline for everyone. This applies to new invoices from January onward; anything already sent keeps its original due date."

If a client pushes back:

"I understand if your accounts team runs on Net 30. I can do Net 30 on larger projects if we split the fee — 50% deposit before I start, and the balance on Net 30. For smaller projects I keep Net 14, so I'm not carrying the gap myself."

Why this works: you are not accusing anyone of paying late. You are announcing a policy — the same one for every client — at a moment when nothing is owed. Most clients accept it the way they accept a new email signature. And notice what the pushback script does: if a client truly needs the month, they can have it — but not with 100% of your money at risk. They put half down.

When due on receipt backfires

Due on receipt is the fastest term on paper. Sometimes it is also the wrong one.

Use due on receipt where it fits: small one-off invoices, the final balance on delivery day, regular clients who pay by card, and any client who has already paid you late once. For everyone else, Net 7 or Net 15 is usually the sweet spot — short enough to matter, realistic enough to be honored.

One naming wobble, cleared up: the scripts above say Net 14, and this section says Net 15. Both terms are in common use — Net 14 is exactly two weeks, while Net 15 is half a month and the option most accounting tools offer. Pick either one; both beat Net 30 by weeks.

Set the default once, then stop thinking about it

Whatever you choose, the term only works if it shows up on every invoice without you re-deciding it each time — usually late at night, when you are tired and feeling generous. Set it as a default:

A shorter term also works best alongside a deposit and a late-fee clause. For the full set of terms that work together, see How to Get Clients to Pay on Time: 7 Payment Terms That Actually Work.

Then pick your default like it matters — because the data says it decides your payday. For most freelancers that means Net 7 or Net 15, due on receipt for small and final invoices, and Net 30 only when a client's process genuinely requires it. And never for free.

The Get Paid Pack — cover

Steal the exact words

Free sample: 3 late-payment email templates + the invoice checklist that gets invoices paid right the first time.

Get the free sample

Want the whole system — all 12 templates, the contract clauses, late fee wording, and deposit scripts? That's The Get Paid Pack.

The Get Paid Pack — $19 launch price

FAQ

What does Net 30 mean, exactly? Payment is due 30 calendar days after the invoice date. Not 30 business days, and not the end of the following month — count 30 days from the date printed on the invoice.

Which payment terms get you paid fastest? The shortest ones your client's process can handle. In FreshBooks' analysis of more than a million invoices, 7-day terms were paid within a week 58% of the time, versus 40% for 30-day terms. For most freelancers, Net 7 or Net 15 is the practical default.

Will clients leave if I shorten my terms? Rarely — if you do it as a policy at the start of a project rather than as a complaint about a late invoice. Announce it once, apply it to everyone, and offer the deposit split to any client whose accounts department genuinely needs Net 30.

Is due on receipt rude? Not rude — but often unrealistic for larger companies, whose payments run weekly or monthly. It works best for small invoices, final balances, and clients who pay by card. For a first invoice to a bigger client, Net 14 is usually the smarter ask.


The Get Paid Pack — cover

Steal the exact words

Free sample: 3 late-payment email templates + the invoice checklist that gets invoices paid right the first time.

Get the free sample

Want the whole system — all 12 templates, the contract clauses, late fee wording, and deposit scripts? That's The Get Paid Pack.

The Get Paid Pack — $19 launch price

Read next

Unpaid Invoices at Year-End: How to Collect Before December 31

Still owed money as the year ends? A week-by-week plan to collect before December 31, with three copy-paste reminder emails.

Late Payment Statistics for Freelancers (2026)

How often freelancers are paid late, how late they run, and what the chasing costs — every figure sourced from named studies and platform data.

How to Write an Invoice That Gets Paid Faster

The anatomy of an invoice that gets paid on the first ask: exact due dates, itemized lines, one-click payment, and the wording the data says works.