Reader-supported: if you buy through links on this page, we may earn a commission at no extra cost to you. How this works

6 Payment Clauses Every Freelance Contract Needs

The contract you skip is the invoice you chase

The email said the project was "on hold, effective immediately." It arrived on a Tuesday, three weeks in. I had turned down two other clients to take that project. I had delivered the first draft, the revisions, and a second draft nobody had asked for but everybody had praised. What I had not delivered was a contract with a cancellation clause — because there was no contract. There was a friendly email thread and a handshake emoji. The amount I eventually collected for those three weeks was zero, and the worst part is that it was correct: nothing, anywhere, said they owed me anything else.

Every freelancer I know has a story like this, and every one of those stories has the same shape. It is not a bad-client story. It is a missing-sentence story. Somewhere in a document that was never written, there was a clause that would have turned the ending into a payment.

Below are the six payment clauses that cover nearly every version of that story — what each one prevents, and the wording you can copy into your next contract. This is general information for freelancers, mainly in the US, not legal advice; if a contract is large or a dispute is already brewing, a local lawyer is worth the hour.

Read your scars, then write the clauses

You don't need a law degree to draft these. You need your own history. Each clause below exists because of a specific way a job goes wrong when the clause is missing: work started on goodwill and ended in silence, a due date that turned out to be a suggestion, an invoice that kept shrinking under mystery fees. Write the six once, keep them in your template, and most payment fights end before they're scheduled.

Clause 1: The deposit

A deposit of [50%] of the total project fee ($[amount]) is due when this agreement is signed. Work begins once the deposit has been received. The deposit is applied to the final invoice.

Why it exists: without a deposit, you are not a vendor — you are an unsecured lender who also does the work. The client's project gets financed out of your rent money, and if they vanish in week two, you hold the entire loss. A deposit splits the risk the way adults split a dinner bill.

Half up front is the most common structure for project work — 50% is the standard deposit for projects over $1,000 in common industry guidance, and 25–50% is routine practice on anything over a few hundred dollars. For very small jobs, full payment in advance is common and nobody serious blinks at it.

The detail that matters: "work begins once the deposit has been received." A signed contract with an unpaid deposit is a promise about a promise. This sentence makes the calendar wait for the money, politely and automatically.

Clause 2: The due date

Invoices are payable within [14] days of the invoice date. The final balance is due on delivery of the final deliverables, before transfer of source files.

Why it exists: if your contract never says when payment is due, then payment is due whenever the client gets around to it — which, in practice, means after every supplier with an actual deadline. An unnamed due date is how a finished job turns into a 60-day wait that nobody technically agreed to and nobody can technically be blamed for.

Pick a number of days and write it down. Short terms — 7 or 14 days — are standard practice for solo freelancers; Net 30 is a convention borrowed from big-company accounting departments, and you are not a big company. The second sentence, tying the final balance to delivery, gives the client a reason to pay promptly that has nothing to do with your feelings: the files move when the money does.

Clause 3: The late fee

Amounts unpaid after the due date will accrue a late fee of [1.5%] per month on the outstanding balance — or the maximum rate permitted by applicable law, whichever is lower — until the balance is paid in full.

Why it exists: a deadline without a consequence is a wish. The late fee is what makes your due date a fact of the client's accounting system rather than a line they can slide past. Around 1.5% per month is the common convention, but the fee only holds up if it was agreed in writing before the work started — it cannot be invented on an overdue invoice.

This clause deserves more than one paragraph, and it has one: our full guide to late fee wording for invoices covers the going rate, the exact phrases at three levels of firmness, and what to do when a client disputes the fee. Here, the short version is enough — the clause must exist in the contract, in these words, from day one.

Clause 4: The pause-work right

If any invoice remains unpaid [7] days after its due date, I may pause all work on the project until the balance is paid in full. Any deadlines will shift by the length of the pause.

Why it exists: this is the clause whose absence hurts the most, because it hurts slowly. The first invoice goes unpaid, and you keep working — of course you keep working; stopping feels like escalating, and besides, the rest of the fee is still coming. Except now your finished work is their leverage. Every deliverable you hand over while a balance is outstanding makes the outstanding balance easier to ignore.

A pause clause converts stopping from a confrontation into a contract term. You're not angry; you're following section four, the one they signed. And the second sentence matters as much as the first: without it, a client can pause your payment for a month and still hold you to the original deadline.

Clause 5: The kill fee

If the client cancels the project after work has begun, for any reason other than my material breach of this agreement, a kill fee of [50%] of the total project fee is due within [14] days of cancellation, in addition to payment for any milestones already delivered.

Why it exists: remember the Tuesday email. Projects die for reasons that have nothing to do with you — budgets get cut, champions leave, strategies pivot. The work you did is real, and so is the other work you turned down to do it. Without a kill fee clause, both of those costs are yours alone. With one, the cancellation is a business event with a price attached, agreed while everyone was still friends.

There is no legal standard amount; the fee is whatever you agree in writing. In practice, most kill fees fall between 25% and 50% of the total fee — lower for an early cancellation, with 50% the common figure once work is properly under way. Some freelancers prefer a sliding scale (25% before the first draft, 50% after it, 100% once final work is delivered); a single flat percentage is simpler and works fine. Either way, "no clause, no kill fee" is the rule: it cannot be introduced after the cancellation email arrives.

Clause 6: The payment method — and who pays the fees

Payment is accepted by [bank transfer, or card via the payment link on each invoice]. All amounts are payable in full; processing or transfer fees may not be deducted from the amount due.

Why it exists: the quietest way to lose money is an invoice that arrives almost paid. The client sent the money — minus the card processing fee, minus the international transfer charge, minus a small discount they assumed for paying "early" at day 45. Each deduction is small enough to feel petty arguing about, which is exactly why they survive. Across a year of invoices, they add up to a week of unpaid work.

Name the method in the contract, and name the rule: the amount on the invoice is the amount that arrives. If you accept cards — and you should, because card payment is the fastest way most clients can pay you — the processing fee is a cost of your business, priced into your rates, not a discount the client takes at the till. For international clients, this clause also settles the currency question before it becomes a surprise: state the currency the fee is charged in, here or in your rates section, and keep it the same on every invoice.

Keep the contract and the invoice identical

Six clauses only protect you if they agree with each other. The late fee rate in the contract must be the late fee rate printed on the invoice. The due date the client signed for must be the due date the invoice states. The deposit you collected must be the deposit the final invoice credits.

This sounds obvious until the day it isn't: a proposal that promises Net 30, a contract that says 14 days, and an invoice that says "due on receipt" is not three documents — it's an argument, and the client will win it by pointing at whichever version costs them least. One set of terms, copied word for word everywhere, is what makes the paperwork boring. Boring paperwork is what gets paid.

The workflow that keeps all six in place

Keeping six clauses consistent across proposals, contracts, and invoices is exactly the kind of detail that slips when you're busy — which is when it matters. This is the one part of the system worth handing to a tool:

Neither tool writes the clauses for you, and neither can rescue a term that was never agreed. They keep your wording consistent. The wording is still yours to write — once, now, before the next Tuesday email.

Pair these clauses with payment terms that get clients to pay on time, and with late payment reminder email templates for the days when a nudge is still the right first move. The contract is not the opposite of a good client relationship. It is what a good relationship looks like in writing — the version where nobody has to refresh a banking app on a Sunday night, wondering.

The Get Paid Pack — cover

Steal the exact words

Free sample: 3 late-payment email templates + the invoice checklist that gets invoices paid right the first time.

Get the free sample

Want the whole system — all 12 templates, the contract clauses, late fee wording, and deposit scripts? That's The Get Paid Pack.

The Get Paid Pack — $19 launch price

FAQ

Do I need a lawyer to use these clauses? For everyday project work, freelancers commonly adapt template clauses like these without one, and a simple written agreement you actually use beats a perfect one you never send. That said, this article is general information, not legal advice — for large contracts, unusual terms, or an active dispute, having a local lawyer review your template once is money well spent.

What if the client insists on using their contract instead? Happens often with bigger companies, and it's not an automatic no. Read their payment section the way this article taught you: Is there a deposit or a milestone structure? A due date, and how long? A late fee? A cancellation payment? Anything missing can usually be added as a short written addendum or even agreed in the email thread before you start — what matters is that it's in writing and agreed before the work, not whose letterhead it's on.

Can I add these clauses to a project that's already running? Not retroactively — a clause introduced mid-project doesn't bind work already done, any more than a late fee can be invented on an overdue invoice. Finish the current job under the terms you have, and put the six clauses in the next contract. If the relationship is ongoing, introduce them in writing as your terms for new work from a stated date; clients who pay on time rarely object.

Is a signed proposal enough, or do I need a formal contract? A proposal the client has accepted, with the payment terms inside it, is a written agreement — and it is far better than the email-thread handshake. The formal contract is the stronger document, and tools that turn a proposal into a contract remove the gap entirely. What you cannot rely on is the version where the terms exist only in your head and your invoice footer.


The Get Paid Pack — cover

Steal the exact words

Free sample: 3 late-payment email templates + the invoice checklist that gets invoices paid right the first time.

Get the free sample

Want the whole system — all 12 templates, the contract clauses, late fee wording, and deposit scripts? That's The Get Paid Pack.

The Get Paid Pack — $19 launch price

Read next

Late Fee Wording for Invoices: Exact Phrases You Can Copy

Copy-paste late fee clauses at three levels of firmness, the going rate to charge, and the one rule that makes a fee enforceable.

How to Get Clients to Pay on Time: 7 Payment Terms That Actually Work

Deposits, short payment terms, late fees and more: seven terms to put in your next contract so you stop chasing money.

Late Payment Reminder Emails: 5 Polite Templates That Get You Paid Without the Awkwardness

Five copy-paste reminder emails — from a friendly heads-up before the due date to a firm final notice at 30 days.